Mavic Cosmic SL 32 DCL M11 Shimano

Mavic - Cosmic SL 32 Disc Centerlock M11

This new member of the Cosmic family takes over from the venerable Ksyrium Pro Carbon UST with fast acceleration and a light, efficient feel on the climbs. Carbon rims and disc brake control give you an extra edge in the mountains and hills. It features the same rim as our pro-level SLR 32, which means super-light full carbon construction for easier climbing and instant acceleration.

Its 21mm internal rim width is optimised for 28mm tyres to give a smooth, efficient ride on a variety of surfaces. And new refined spokes help make this rim 80g lighter than its predecessor. The new Infinity hub platform adds rigidity, so the wheels feel fast and responsive out of every corner.

Road Tubeless allows you to run lower tyre pressures for improved rolling efficiency, a smoother ride and less risk of punctures. The new rim bed shape makes it easier than ever to fit and remove tyres. If your typical rides include hard climbs, technical corners and descents, the Cosmic SL 32 Disc is a quick and easy way to supercharge your road bike.
Designed, engineered and patented by Mavic in Annecy, France, these wheels are 100% handmade in Mavic's European carbon factory.

• Weight set: 1499g
• Weight front: 692g
• Weight rear: 807g

Rims

• Material: 100% carbon fiber
• Height: 32mm
• Drilling: traditional
• Disc brake specific profile
• Tire: UST Tubeless and tubetype
• Internal width: 21 mm
• ETRTO size: 622x21TC
• Design: hooked

Spokes

• Material: steel
• Shape: straight pull, flat, double butted
• Nipples: brass, ABS
• Count: 24 front and rear
• Lacing: front and rear crossed 2, contactless

Hubs

• Front and rear bodies: aluminum
• Axle material: aluminum
• Front: Quick release and 12x100 through axle compatible
• Rear: Quick Release, 12x142 and 12x135 compatible
• Infinity hubs
• Hub available for Center Lock brake rotors only
• Instant Drive 360 freewheel technology
• QRM Auto bearing preload technology

Compatibility

• Freewheel: Shimano convertible to Campagnolo ED11
• Front axle: 12x100 thru axle, easily convertible to quick release with included adapters Not compatible with 15mm through axles
• Rear axle: 12mm thru axle, convertible to Quick Release with included adapters

Intended use

• ASTM CATEGORY 2 : road and offroad with jumps less than 15cm
• For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg, bike included
• Maximum tyre pressure: 61bar/88PSI with a 25mm tyre - 35bar/51PSI with a 64mm tyre
• Recommended tire sizes: 25 to 32 mm
• Max Pressure: see indication on wheel and tire If they differ, use the lowest of the 2

Scope of delivery

• Front QR adapters
• Rear QR adapters for Instant Drive 360
• UST valve and accessories
• Pre-installed tubeless rim tape
• User guide